Kuala Lumpur & SelangorDryer Repair in Kuala Lumpur
We repair vented, condenser and heat pump tumble dryers, as well as washer-dryer combo units. If your dryer won't heat, won't tumble, takes too long to dry or keeps tripping the breaker, our technicians find the fault and carry common parts for same-visit repairs.
Common dryer repair problems we fix
- Not heating
- Drum not turning
- Takes too long to dry
- Overheating
- Tripping the breaker
- Loud squeaking or thumping
- Won't start
- Water tank or pump error
Heating system repairs
No heat is the most common dryer fault. We test every part of the heating circuit.
Heating elements
Testing element resistance and replacing burnt or open-circuit heating elements.
Thermostats & thermal fuses
Replacing cycling thermostats, high-limit thermostats and blown thermal fuses.
Heat pump systems
Diagnosing heat pump compressors, fans and sensors on energy-efficient heat pump dryers.
Moisture & temperature sensors
Cleaning or replacing sensors that end cycles too early or run them too long.
Drum, drive & mechanical repairs
A dryer that won't tumble or makes loud noises usually has a worn mechanical part.
Drive belts
Replacing broken or stretched drum belts so the drum turns smoothly.
Drum rollers & bearings
Replacing worn rollers, bearings and drum seals that cause squeaking or thumping.
Idler pulleys
Replacing seized or noisy idler pulleys that keep the belt under tension.
Drive motors
Testing motor windings and start switches, and replacing failed motors.
Airflow, venting & electrical safety
Blocked airflow makes drying slow and is a common cause of overheating.
Lint filters & ducts
Clearing blocked lint paths and exhaust ducts to restore airflow and drying speed.
Condenser units & pumps
Cleaning condenser units and repairing water pumps and tank sensors on condenser dryers.
Door switches & control boards
Replacing faulty door switches, timers and control boards that stop the dryer from starting.
Wiring & breaker trips
Tracing shorts and earth faults that trip your home's circuit breaker.
How our dryer repair process works
- 1
Diagnosis & safety check
We disconnect power and test the heating circuit, motor, belt and sensors to pinpoint the fault.
- 2
Repair with the right parts
After you approve the quote, we replace the faulty components and clean lint and airflow paths.
- 3
Test cycle & handover
We run a full drying cycle to confirm heat, tumbling, airflow and electrical safety before handing it back.
Brands we repair
Our technicians work on all major brands sold in Malaysia, including:
- Samsung
- LG
- Electrolux
- Bosch
- Panasonic
- Beko
- Midea
- Haier
- Whirlpool
Areas we serve
Dryer Repair across Kuala Lumpur and the Klang Valley, including:
- Kuala Lumpur City Centre
- Mont Kiara
- Bangsar
- Cheras
- Setapak
- Kepong
- Ampang
- Petaling Jaya
- Subang Jaya
- Puchong
- Shah Alam
- Cyberjaya
Dryer Repair FAQs
Why is my dryer running but not heating?
+
The usual causes are a burnt heating element, a blown thermal fuse or a faulty thermostat. On heat pump dryers, it can be a compressor or sensor fault. We test each part to confirm.
Why does my dryer take so long to dry clothes?
+
Slow drying is most often caused by a blocked lint path or exhaust duct, a dirty condenser, or a sensor that ends the cycle too early. Cleaning and a sensor check usually fixes it.
Why is my dryer drum not turning?
+
A broken drive belt is the most common cause. Worn rollers, a seized idler pulley or a failed motor can also stop the drum.
Do you repair washer-dryer combo machines?
+
Yes. We repair both the washing and drying functions of washer-dryer combo units.
Is an overheating dryer dangerous?
+
It can be. Overheating is often caused by blocked airflow or a failed thermostat. Stop using the dryer and book a check as soon as possible.
Need dryer repair today?
Message us on WhatsApp with your appliance, the problem and your area. We'll confirm a time slot and send a verified technician.
Book on WhatsApp